Autonomous Voice Control Pick and Place Rover IJTSRD
This project is to control the Robot for Application through the voice operated. This project is used to pick and place the objects by Robot Controller Application in the remote areas. Battery energy is used to give the power to robot because now a day’s power demand is increased due to this power failure happen […]
Investigation on Friction Stirs Welding of Aluminum Alloy and Copper Dissimilar Metals IJTSRD
The joining of dissimilar Aluminium Alloy and Copper aluminium plates of 5mm thickness was carried out by friction stir welding FSW technique. Optimum process parameters were obtained for joints using statistical approach. Five different tool designs have been employed to analyse the influence of rotation speed and traverse speed over the micro structural and tensile […]
Design and Analysis of Ceiling Cable Holder Base IJTSRD
Injection moulds are classified into two types based on runner design i.e. Cold runner moulds and Runner less moulds i.e. hot runner moulds. In cold runner moulds, for multi cavity and multi point injection moulds, there is wreckage of material in runner area. Also wastage of material is more than component weight. To overcome the […]
CFD Analysis of Solar Air Heater Provided with Discrete Inclined Rib Roughness on the Absorber Plate A Review IJTSRD
Heat transfer enhancement is a subject of considerable interest to researchers as it leads to saving in energy and cost. Because of the rapid increase in energy demand in all over The world, both reducing energy lost related with ineffective use and enhancement of energy in the meaning of heat have become an increasingly significance […]
Effect of Diesel Engine Fuelled with Biofuel Blends IJTSRD
The present work was conducted on a 1-cylinder, 4S, DI CI engine, on which neat diesel, neem biodiesel and polanga biodiesel and ethanol fuel were tested by varying the load on the engine setup at various blend ratios such as – diesel fuel 100 D100 , biodiesel neem 100 N100 , biodiesel polanga 50 blended […]